Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Tiburon, CA
We provide independent Lennox air duct cleaning and duct-side service across Tiburon, and we’re not affiliated with, authorized by, or endorsed by Lennox. What makes our Lennox work here different is that we know how the Lennox platform behaves when the ductwork around it is wrong: how a communicating air handler stages airflow, how a variable-speed blower reacts to a leaky chase, where a cased coil sits in a retrofit attic. In a town where the duct runs are as irregular as the hillside, that distinction matters more than the badge on the van. Call (844) 459-0252. We answer 24/7.
Why Tiburon Residents Choose Us for Lennox Service
Tiburon homeowners with Lennox equipment usually have one of two things going on: the system is fine and the ducts are choking it, or the ducts are fine and something on the coil side needs attention. Telling those apart takes a technician who reads the equipment, not just the grilles. Our technicians have up to 15 years of experience, and we work with professional-grade equipment from Rotobrush and Nikro rather than consumer tools, plus Abatement Technologies negative air machines to hold contaminants down during the work.
We’re an independent provider, which means we give you our own read on a Lennox system instead of a script. When a Signature-series furnace starts tripping on limit, we want to know why before we quote anything. Quality parts that fit the equipment, a documented before-and-after record of your own ductwork, and a scheduled visit that respects a tight hillside driveway.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Tiburon
Lennox equipment is generally well built. What goes wrong around it usually starts in the duct system. These are the patterns we see most in Tiburon homes.
- Undersized or leaky return chases feeding a variable-speed air handler. On a Lennox communicating system, the ECM blower ramps up to meet airflow demand. If the return chase running through a hillside wall cavity is too small or full of gaps, that extra pull comes from the crawlspace, drawing fog-damp air and wildfire ash straight back into the system. The equipment isn’t broken. The chase is.
- Cased A-coils fouled by construction dust in flex duct. Lennox evaporator coils in CBX and CBA air handlers collect the dust left behind by years of additions and remodels. You won’t see it as dust on your furniture. You’ll see it as a frozen coil or high static pressure.
- Sagging or separated flex duct in tight sloping roof decks. Retrofitted flex in a Tiburon roof deck kinks, sags, or pulls away at the collar. A Signature-series furnace starved of return air will short cycle or trip its limit switch, and the thermostat gets blamed.
- Corroded duct boots and mastic in crawlspace-mounted equipment. Salt air and winter dampness along the bay work on metal, mastic, and blower housings. Pier-and-beam construction keeps that equipment close to the marine fog layer, where corrosion moves faster than most homeowners expect.
- Long, irregular duct runs with no documentation. Irregular routes through a hillside house mean nobody knows what the system actually looks like inside. Video inspection settles it, and it’s the first thing we reach for.
Lennox Service in Tiburon: What Local Conditions Mean for Your Equipment
Here’s the local reality that shapes Lennox duct work in Tiburon more than anything else: the pier-and-beam and crawlspace construction on the hillside puts duct boots, mastic joints, and crawlspace-mounted air handlers within constant reach of marine-layer dampness and salt air. Inland Marin doesn’t see quite this combination, because the equipment isn’t sitting that close to the fog. So a Lennox duct problem here often starts on the crawlspace side of the floor rather than in the living space, and the first symptoms show up as corrosion at a boot or a failing mastic line, not as dust on a coffee table. That’s why our Lennox work in Tiburon usually opens with a look underneath before we ever pull a register. When a return chase is corroded at its base, cleaning alone won’t hold – sealing and repair come first.
Lennox Models & Products We Service in Tiburon
We work on the Lennox platform across its main lines in Tiburon: Dave Lennox Signature Collection furnaces and heat pumps, Elite series furnaces and air conditioners, Merit series furnaces and air handlers, and variable-speed or communicating air handlers paired with iComfort-enabled thermostats. On parts, our rule is simple. Where Lennox controls the tolerances – cased coils, blower wheels and motors, communicating control boards – we lean OEM for a proper fit. Flex duct, mastic, insulation, and registers are fine from quality aftermarket sources. We repair, install and service Lennox equipment; we’re independent and not a dealer.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Tiburon
Pricing is per job, set by a written estimate before any work starts. What drives the number on a Lennox system is access and scope: whether the air handler sits in a tight crawlspace or a sloping roof deck, how many zones the system serves, how much corrosion or construction debris the inspection finds, and whether the job is cleaning alone or cleaning plus duct sealing and repair.
A free estimate includes a look at the equipment, a video inspection of the return chase and flex runs where access allows, and a written scope so you can see exactly what we’re proposing and why. No per-vent quotes, no teaser figure that grows once we’re on site. Call (844) 459-0252 for an exact quote – estimates are free.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Tiburon
Yes. A leaky or undersized return chase forces a variable-speed Lennox air handler to ramp up and pull unconditioned air from wall cavities or crawlspaces, which raises static pressure and makes the blower work harder than it should. Left alone, that strain shows up as short cycling, frozen coils, or premature blower motor wear. Call (844) 459-0252 – estimates are free.
It’s a real concern in Tiburon, where decades of high-end additions often leave construction dust and debris trapped in flex duct and return chases. That debris restricts airflow to Lennox coils and blowers, and the symptoms come up as performance problems, not visible dust. Video inspection tells you whether cleaning is actually needed. Call (844) 459-0252 to book one.
Wildfire smoke events push fine ash into return ducts and filters, and in Tiburon that ash collects faster in leaky chases and corroded boots near crawlspace-mounted equipment. A Lennox system pulling through a compromised return will keep recirculating that ash long after the smoke clears. Cleaning and sealing the return side is the fix. Call (844) 459-0252 for a quote.
For parts Lennox controls the tolerances on – cased coils, blower wheels and motors, communicating control boards – yes, OEM is the right call for a proper fit. Flex duct, mastic, insulation, and registers don’t need to be OEM, and quality aftermarket is usually the better value there. We’ll tell you which is which on your system. Call (844) 459-0252 with questions.
Watch for corrosion at the duct boots and mastic joints, dampness or condensation near the air handler, and any change in how the system cycles. Salt air and marine-layer fog are hard on crawlspace-mounted Lennox equipment in Tiburon, so those are the first places trouble shows. Call (844) 459-0252 – estimates are free.
Service Areas Near Tiburon
We also take Lennox duct work in Corte Madera and Richmond, and around San Pablo, El Sobrante, Tara Hills, El Cerrito, and Pinole. If your home is nearby and your system is on the Lennox platform, reach out and we’ll tell you what a visit involves.
Book Your Lennox Service in Tiburon Today
If your Lennox system isn’t performing the way it should, or you’ve just finished a remodel and want to know what’s in the ducts, call Meadow Air Duct Cleaning at (844) 459-0252. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, and the written quote sets the price.
Written by the team at Meadow Air Duct Cleaning.