Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Richmond?
Duct repair and sealing in Richmond typically costs $350 to $1,800, with most single-system repairs landing between $450 and $900. Small fixes like a single disconnected joint or a cracked section of flex duct usually run $350 to $550, while sealing a whole attic or crawlspace system with multiple leaks falls in the $900 to $1,800 range. The written estimate you get after we inspect the system sets the final price.
We’re Meadow Air Duct Cleaning, and duct repair is one of our three core services, alongside air duct cleaning and dryer vent cleaning. That matters for pricing, because a company that only cleans can’t tell you whether the leak you’re paying to seal will just reopen next season. Our technicians have up to 15 years of experience, and we use professional-grade equipment from Rotobrush, Nikro and Abatement Technologies on every job. Estimates are free. Call (844) 459-0252. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical duct repair and sealing in Richmond: $350 to $1,800, with most jobs between $450 and $900.
- Single-joint repairs are the cheapest fix. Whole-system sealing is the most expensive.
- Older Richmond housing stock, especially pre-1970 homes, is the biggest price driver we see.
- Sealing a leaking system is usually far cheaper than the energy waste and comfort complaints that follow.
- You get a written estimate before any work starts, and the estimate is free.
Duct Repair & Sealing Cost Breakdown (2026)
Richmond sits in a mild climate, so the most common duct problems here aren’t freeze damage. They’re age, settling, pest intrusion, and poor original installation. The table below shows what each kind of job typically runs. These are estimates for the Richmond market, not exact quotes. Your written estimate is the number that counts.
| Job Type | Typical Estimated Cost |
|---|---|
| Single disconnected joint reconnection | $350 – $550 |
| Sealing individual leaks with mastic or foil tape | $350 – $650 |
| One flexible duct run replacement | $180 – $350 |
| Multiple run repairs (3-5 runs) | $550 – $1,100 |
| Whole-system sealing (attic or crawlspace) | $900 – $1,800 |
| Duct cleaning combined with repair and sealing | $700 – $1,900 |
| Rigid duct section replacement | $300 – $800 |
What pushes a job toward the top of those ranges? Access is the biggest one. A system in a low attic where a technician can barely turn around takes longer to work in than one with headroom. Flex duct is quicker to repair than rigid metal duct. If a leak sits behind a finished wall or under flooring, the repair itself is small but the access work isn’t. On the other end, a straightforward disconnected joint at the plenum is the cheapest call we make.
What Affects Duct Repair & Sealing Pricing in Richmond
- Age of the home and the duct system. Much of Richmond’s housing was built before 1970. Original ductwork from that era is often unlined, poorly sealed at the joints, and in some cases has been patched over more than once. We often find older systems with the same leak handled three different ways by three different hands, and untangling that takes time.
- Where the ducts run. Attic and crawlspace runs are the standard here. Systems that run through a garage or a wall cavity cost more to reach and seal properly.
- Duct material. Flex duct is fast to reconnect and replace. Rigid sheet metal takes more labor. Older insulated duct that’s crumbling or soaked is a replacement, not a repair.
- Number of leaks. One leak is a flat call. Fifteen leaks across a whole system means we’re sealing the entire run, which is a longer job but saves far more over time than chasing leaks one at a time.
- Contamination you didn’t know about. If ducts have pest debris, mold growth, or heavy dust buildup, repair alone won’t fix the air quality. The system needs cleaning before sealing, and we quote both together so you see the full picture.
- Whether the leak is structural or just poor connection. A joint that came loose is straightforward. A duct that’s crushed, sagging, or torn by pest intrusion needs replacement, which costs more.
Why Duct Repair Belongs With Duct Cleaning
Most duct cleaners can agitate and vacuum a system. Fewer can diagnose why it’s leaking and fix it. That’s the gap we fill. When our Rotobrush rotary brush system runs through a duct, it doesn’t just loosen debris. The technician can feel the change in resistance when a joint is disconnected or a run is crushed. The Nikro HEPA vacuum captures what comes out, so it isn’t pushed back into your living space. And when we find a structural problem, we fix it. We clean it. If it’s broken, we fix it.
That same approach means we treat duct repair and cleaning as one job when it makes sense. Sealing over a dirty duct doesn’t help anyone. You’d be locking dust and debris into a tight system and then delivering it into every room. Cleaning first, then sealing, gets you leak-free ducts that are also clear. That’s the order that works.
On the containment side, we use Abatement Technologies negative air machines. This is equipment built for remediation professionals, brought to your home. It matters on jobs where we’re disturbing older duct material or loosening years of buildup. You shouldn’t have to worry about what’s floating in the air while we’re working.
Should You Repair or Replace Your Ducts?
Repair is usually the answer when the system structure is sound and you’re dealing with isolated leaks. Replacement starts to make more sense when the ductwork is collapsing, heavily contaminated, or so old and patched that sealing it is throwing money at a system that won’t hold.
A few signs point toward replacement:
- The duct liner is crumbling or has peeled inside the run.
- Multiple runs are crushed or sagging and can’t be supported back into shape.
- Pest intrusion has damaged large sections of flex duct.
- Every joint along the run has been taped and retaped and still leaks.
If you’re not sure which side of the line you’re on, that’s what the free estimate is for. We look, we measure, we tell you plainly whether repair or replacement is the better call for your system. Call (844) 459-0252.
How Much Do Leaky Ducts Cost You If You Do Nothing?
Leaking ducts waste energy every month. A system with disconnected joints and unsealed seams spills conditioned air into the attic or crawlspace instead of the rooms you’re paying to cool. In a mild climate like Richmond’s, that waste is less dramatic than in snow country, but it’s constant across the year. It also shows up in other ways: rooms that never quite reach the thermostat setting, a system that runs longer than it should, and dust pulled in through leaks and blown into your living rooms.
Sealing a whole system in the $900 to $1,800 range is a one-time cost. The waste from unsealed ducts doesn’t stop until the leak does. For most homeowners, the repair pays for itself through lower energy use and better comfort, though exactly how fast depends on how much your system is leaking. We’ll show you what we find before you decide.
How to Save on Duct Repair & Sealing in Richmond
There’s no magic trick to a lower duct repair bill, but there are a few practical ones.
- Get the whole system checked at once. Chasing one leak, then another, then another is the expensive way. A single inspection that finds all the leaks and quotes one job is usually far cheaper than repeated service calls.
- Bundle repair with cleaning. Cleaning and sealing a system in one visit avoids a second setup and gives you a cleaner result. The combined package is priced together, so ask for it in one estimate.
- Fix small leaks early. A disconnected joint today is a two-hour fix. Left alone, it can lead to a crushed duct run and a much larger repair later.
- Ask what’s causing the leak, not just where. If a joint keeps coming apart, the underlying issue is probably poor support or vibration. A proper repair addresses the cause, not just the tear.
- Ask for a free written estimate. No charge, no commitment. You’ll get the price in writing before any work begins, and the written estimate sets the final price.
If you have whole-home air quality equipment from Honeywell or Aprilaire, mention it when you call. We service and work alongside those systems, so we can make sure duct repair doesn’t interfere with how your filtration or humidity control is set up. If you’d like a full picture of what duct service looks like in your neighborhood, our Richmond page covers the area, and we’re happy to talk through it on the phone.
Why Choose Meadow Air Duct Cleaning for Duct Repair in Richmond
Duct repair is a specific skill, and it’s the piece most cleaning companies can’t offer. We bring three things to a Richmond job:
- The right equipment. Rotobrush rotary brush systems for mechanical agitation and debris extraction. Nikro HEPA-rated vacuums that capture contaminants rather than just displacing them. Abatement Technologies negative air machines for containment-grade work. This is equipment built for remediation professionals.
- The repair capability. We offer air duct repair as a standalone service, not an upsell. If you call us for cleaning and we find structural problems, we can fix them in the same visit.
- Experience you can ask about. Our technicians have up to 15 years of experience. We’re licensed and insured. That’s the baseline we hold every job to.
We also offer dryer vent cleaning, which addresses a leading cause of residential fires. It’s a different job from duct repair, but it’s the same standard of care. If you’re having work done on the duct system, it’s a sensible time to have the dryer vent checked too.
What Happens When You Call
You call (844) 459-0252, tell us the symptoms, and we book the visit. When a technician arrives, the first step is inspection: running the system to see where air is escaping, checking each joint and run, and looking for signs of contamination or damage. Then we quote the repair in writing. You decide. If you approve, we do the work, clean up, and show you what was fixed. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
FAQs – Duct Repair & Sealing Cost
How much does duct repair and sealing cost in Richmond in 2026?
Most Richmond jobs fall in the $350 to $1,800 range, with the typical job between $450 and $900. Single-joint repairs are on the low end; whole-system sealing and combined cleaning-plus-repair jobs sit on the high end. Call (844) 459-0252 for an exact quote, and the estimate is free.
Is it cheaper to repair or replace leaking ducts?
Repair is usually cheaper: a $350 to $900 repair typically beats a full system replacement, which we’d price separately once we see the scope. Replacement makes more sense when the ductwork is collapsing, heavily contaminated, or too patched to hold a seal. The free inspection tells you which case you’re in. Call (844) 459-0252 to book one.
Can you come the same day if my ducts are leaking?
Yes, same-day service is often possible when you call before mid-afternoon. Fast dispatch runs from 7am to 7pm, Sunday through Friday. We answer the phone 24/7. Call (844) 459-0252 and we’ll find you the earliest opening.
Why does sealing cost more than I expected?
Whole-system sealing runs $900 to $1,800 because it covers every joint and connection, not just the obvious leak. Access (attic, crawlspace, low ceiling height), duct material, and the number of runs all move the price. We quote in writing after inspection, so you know exactly what you’re paying for before we start. Call (844) 459-0252 to get yours.
Do I need cleaning before repair, or can I just seal the leaks?
Cleaning should come first when the ducts are dirty, so you’re not sealing dust and debris into a tight system. Combined cleaning and repair typically runs $700 to $1,900. If your ducts are clean and the only issue is a loose joint, seal-only repair is fine at $350 to $550. Call (844) 459-0252 and we’ll tell you which one your system needs.
Book Your Free Duct Repair Estimate in Richmond
Leaking ducts waste energy, pull dust into your home, and leave rooms uncomfortable. Repairing and sealing them fixes the problem at the source. We’ll inspect the system, show you what we find, and quote the job in writing. No pressure, no upsell, just a straight answer about what your ducts need and what it costs. Our technicians have up to 15 years of experience, we’re licensed and insured, and we use professional-grade equipment on every job. Call (844) 459-0252 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Richmond market as of 2026. Meadow Air Duct Cleaning offers free estimates – call (844) 459-0252.
Written by the team at Meadow Air Duct Cleaning.
What Our Customers Say
"Job was done well and the house smells better. There was some dust knocked loose around a couple of the registers that I had to wipe down afterward."
- Carlos Martinez"They photographed every return and supply before starting and sent me the file afterward. No upsell to a sanitizing treatment I didn't need."
- Sofia Herrera"Fair price and thorough work. They ran about an hour and a half past the estimated finish time, so don't schedule anything tight after."
- Stephanie Padgett